Imodeli yombala weti yomaleko emithathu (500-800kg/h) imodeli: T3C6
| Entsha kraca Umbala weCCDUkuhlelwa Kombala | |
| Isicelo, uhlobo lwemveliso: | UkuhlelaIti |
| Iintlobo zemveliso: | Zonke iintlobo zeTea |
| Isikhundla,kgngeyure, hayi ngaphantsi: | 500 |
| Inani leIikhamera | 18 |
| Inani leImijelo | 1152 |
| Inani leULENKO: | 3 |
| Inani lee-chutes: | 18 |
| Ubungakanani (Lmm×Wmm×Hmm) | 3340X2776X3916 |
| Ireyithi yokuqhuba | 120:1 |
| Ukunikezwa Amandla | 220V/50Hz |
| Ukukhanya: | Ukukhanya kwe-RGB ye-LED |
| Uhlobo lokuchongwa (uphawu lwesiphene): | Ukuhlela ngokwe 1) umbala 2) ubukhulu 3) imilo |
| Ikhamera yeCCDUluvo: | ToshibaJaphan |
| Ukupholisa: | Ukusebenzisa uxinzelelo olugqithisileyo |
| Iphaneli yokulawula: | Isikrini esibanjwayo, NEC |
| Bonisa kunye nemiyalelo yolwimi: | ISINGESI |
| Ukuhlela kakuhle , %, hayi ngaphantsi kwe: | 99% |
| Ukulungiswa kwekhamera yeCCD, ipixels: | 16200ipixel |
| Isisombululo esibonakalayo: | 0.02mm okanye ngaphantsi |
| Ubonelelo lwamandla, V: Ukutya umbane;Kw | 220±5% 2.0-4.0 |
| Ukuphindaphinda, Hz: | 50±1 |
| Uxinzelelo lomoya, MPa: | 0.6-0.8 |
| Iyunithi yokulawula umoya weCompressor | SMC Japan |
| Tshintsha | Schneider eJamani |
| Ubushushu bemekobume, °С: | Phakathi +0 ° С kunye +40 ° С |
| Ukufuma okunxulumene ne-25 ° С, %: | Ukusuka kwi-20 ukuya kwi-80 |
| Ukuhamba komoyaUkusetyenziswa(L/min) | 3000 |
| Udidi lokhuseleko kumothuko wombane: | I |
| Ukalo lokhuseleko lokungena: | Hayi ngaphantsi kwe IP54 |
| Inqanaba lengxolo kwindawo yokusebenza, dB, hayi ngaphezulu kwe: | 80 |
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
Iindidi zeemveliso
-
Umatshini wokomisa amayeza/Ientyatyambo/Umatshini wokomisa amayeza e-Herbal...
-
Umtshini weti ozenzekelayo kunye noomatshini bokutywina J...
-
Umatshini wokupakisha ibhegi yeti Umzekelo:JM180
-
Rotor-vane uhlobo iti rolling-ukusika umatshini JY-...
-
Japan Mitsubishi Power Water Pump 2”
-
Isantya esiphezulu somatshini wokupakisha umatshini wokupakisha Umzekelo: HPP-65
