With the continuous improvement of the understanding of automatic packaging machines and the improvement of the production capacity of the equipment, more attention is paid to the safety of the actual operation of the equipment. It is very important for both the equipment and the producer itself, so you should operate it safely Here are a few things to know.

1. Before starting the machine, check whether the compressed air pressure meets the requirements, check whether the main components are intact, and check around the machine to ensure safety after starting.

2. Clean the feeding system and metering machine before production to ensure product hygiene.

3. Close the main power air switch, turn on the power to start, set and check the temperature of each temperature controller, and put on the packaging film.

4. First adjust the bag making of the multifunctional packaging machine and check the coding effect. At the same time, turn on the feeding system to supply materials. When the material reaches the requirements, first turn on the bag making mechanism to start filling the material and start production.

5. During the production process, check the quality of the product at any time, such as whether the basic requirements of the product such as mouth vacuum, heat sealing line, wrinkles, weight, etc. are qualified, and make adjustments at any time if there are any problems.

6. Operators are not allowed to adjust some operating parameters of the automatic packaging machine at will. However, during production, the temperature and partial phase angle parameters of each temperature controller can be appropriately adjusted according to the actual situation, and the adjustments can be made under the guidance of professional personnel. Ensure the stable operation of equipment and ensure normal production and product quality.

7. If there is a problem with the packaging machine during the production process or the product quality is unqualified, the machine should be stopped immediately to deal with the problem. It is strictly prohibited to deal with problems while the machine is running to prevent safety accidents.

8. During actual operation, you must always pay attention to the safety of yourself and others, and ensure the safety protection of all parts of the equipment. There are strict requirements for the operation of the equipment touch screen. It is strictly forbidden to use fingertips, nails, or other hard objects to press or knock the touch screen.

9. When debugging the machine or adjusting the bag making quality, bag opening quality, and filling effect, you can only use the manual switch for debugging. It is strictly prohibited to perform the above debugging when the machine is running to avoid accidents.

10. After production, the operator must thoroughly clean the automatic packaging machine. During the cleaning process, it is strictly forbidden to use large amounts of water or high-pressure water to flush the equipment. At the same time, pay attention to protecting the electrical parts.